Brief introduction of multiparameters
In order to protect the water environment, it is necessary to
strengthen the monitoring of sewage discharge. The quality of the
design and inspection of the test points (mainly multi-parameter
water quality analyzers) plays a vital role in water environmental
monitoring. Determination of various chemical components in water
by chemical and physical methods. Multi-parameter water quality
analyzer is divided into simple analysis, full analysis and special
analysis of three. Brief analysis in the field, the analysis of the
project less, but requires fast and timely, apply to the initial
understanding of a large area within the aquifers of the main
chemical composition of groundwater specific analysis of the
project according to the specific needs of the task. Another
multi-parameter water quality analyzer can quickly and accurately
qualitative and quantitative analysis, and can be fully automated,
intelligent, real-time online, multi-parameter analysis at the same
time, the results and print the report card.
Features of NANBEI multiparameters:
u Several parameters can be shown on the same screen. It can
simultaneously measure pX/pH, mV, conductivity, TDS, salinity,
resistivity, dissolved oxygen, saturation and temperature.
u It provides many common ion modes such as H+,Ag+,Na+,K+,NH4+,Cl-,F-,NO3-,BF4-,CN-,Cu2+,Pb2+,Ca2+
u It follows GLP practice and can store 2200 sets of measuring
u It provides zero oxygen and full scale calibration.
u It provides three measuring modes: continuous measuring, timing
measuring and balance measuring mode.
u It has USB ports. If matched with communication software, it can
be connected with PC.
u It is small size and low-energy designed. The protection level is
IP65 for portable work and field measurement.
|T D S||0.000 mg/L~100g/L||_||0.000 mg/L~100g/L|
|Dissolved oxygen concentration||(0.00~19.99)mg/L||_||(0.00~19.99)mg/L|
|Dissolved oxygen saturation||(0.0~199.9)%||_||(0.0~199.9)%|
|Response time||≤45s(90% respond at 20℃)||≤45s(90% respond at 20℃)|
|O R P||0.01 mV||_|
|O R P||±0.03%FS|
Dissolved oxygen :(0.0~40.0)°C
|Ion Mode||Provide multiple common ion mode(such as H+, Na+, K+, NH4+, CI-,
F-, etc.) custom ion mode||_|
|Measuring Mode||Three measuring mode|
Full scale calibration
|Date storage||2200 set of data|
|View, delete &print||Yes|
|Power||Four AA batteries|
|Dimension(mm); weight(kg)||210×100×45; 0.5|
|Standard configuration||DJS-1DF platinum black conductivity electrode; E-201-CF PH
combination electrode; DO-957-F probe(waterproof); T-818-B-4F ATC
probe(waterproof); Standard buffer|